For 10.3 Settings Current Production model
Laser Pro Park
8.3
These are the configuration settings with software
version 10.1 (Old production model)
| LED Flashes | Effect |
| 3 | Sets
parking sensor distance. This has 4 settings. Normal range (One Tone) Short Range (Two Tones) This option will pretty much will disable the Parking Sensor Long Range (Three Tones) Extra Long Range (Four Tones) |
| 5 | Disables/Enables Startup Sounds (Audio startup muted) |
| 8 | Sets 4
seconds timer (Default is 8 seconds) You must have this in the default timer setting before you can change this to 4 seconds. After 60 seconds you will hear 2 beeps to alert you that the system is ready. |
| 10 | Disables/Enables Flashing Green LED during normal operation |
| 21 | Sets 8 seconds timer, No timer
options (Default is 8 seconds) To identify No timer is enabled: After startup you will see 1 Green LED light accompanied with a single beep. If you try to set any other option after No Timer option is set you must ignore the first green LED light with the beep in your count.
After 60 seconds you will hear 2 beeps to alert
you that the system is ready. |
Laser Pro Park
8.3
These are the configuration settings with software
version 10.3 (Current production model)
| LED Flashes | Effect |
| 4 | Sets
parking sensor distance. This has 4 settings. Normal range (One Tone) Short Range (Two Tones) This option will pretty much will disable the Parking Sensor Long Range (Three Tones) Extra Long Range (Four Tones) |
| 6 | Disables/Enables Startup Sounds (Audio startup muted) |
| 13 | Sets 4
seconds timer (Default is 8 seconds) You must have this in the default timer setting before you can change this to 4 seconds. After 60 seconds you will hear 2 beeps to alert you that the system is ready. |
| 15 | Disables/Enables Flashing Green LED during normal operation |
| 12 | Sets 8 seconds timer, No timer
options (Default is 8 seconds) To identify No timer is enabled: After startup you will see 1 Green LED light accompanied with a single beep. If you try to set any other option after No Timer option is set you must ignore the first green LED light with the beep in your count.
After 60 seconds you will hear 2 beeps to alert
you that the system is ready. |